Marley Wessex Interlocking Roof Tile
£1.98 inc VAT
|Size of Tile||420mm x 330mm|
|Cover Width||298mm (nominal)|
|Covering Capacity||9.7 tiles/m2 at 75mm headlap|
|10.4 tiles/m2 at 100mm headlap|
|Weight of Tiling||50 kg/m2 (0.49kN/m2) at 75mm headlap|
|53 kg/m2 (0.52kN/m2) at 100mm headlap|
|Battens Required||2.9 lin.m/m2 at 75mm headlap|
|3.1 lin.m/m2 at 100mm headlap|
|Batten Size Recommended||38 x 25mm for rafters/supports not exceeding 450mm centres|
|50 x 25mm for rafters/supports not exceeding 600mm centres|
|Notes||The effectiveness of the tile or slate to operate at the minimum recommended pitch and lap may be influenced by special circumstances. Guidance on pitch and lap should be obtained from the Technical Advisory Service for the following:|
|• Interlocking tiles and slates where the roof slope exceeds 6 metres in length and/or the site is rated to be in a severe exposure category.|
|• Double-lap fibre cement slates where the roof slope exceeds 6 metres in length (severe/very severe exposure) and 9 metres in length (sheltered/moderate exposure).|
14 Day Money Back Guarantee
We are happy to accept returns, if they are returned within 14 days of being received, and providing item has not been used or opened and is in original condition.
An email MUST be sent before returning your item, a note must be enclosed with the returned item, stating the reason for the return and the name under which the item was purchased.
All products are individually inspected before being dispatched, to ensure items are sent out in perfect condition. In the unlikely event that your item is faulty, please return it to us within 7 days of receipt in its original condition. Upon inspection, we will be happy to replace or repair where possible, or refund you in full if the item is found to be faulty.