These Duo Modern Marley concrete roof tiles are designed to look like and blend in with the small format slates found in many regions. This concrete roof tile offers the best in cost-effective roof tile solutions.

Concrete interlocking tiles have a long lifespan and can withstand extreme weather conditions, rot and insect damage, strong and durable, these tiles are designed to last. Marley concrete interlocking roof tiles are top of the range, durable and get the job done.

The perfect low pitch solution, Marley concrete roof tiles can achieve an A+ rating in the BRE Green Guide to Specification making these tiles more versatile than others on the market.

Marley concrete roof tiles are one of the most popular brands on the market, with excellent covering capacity and high level of durability, these are the concrete interlocking roof tiles for you.

Why Choose Marley Concrete Interlocking Roof Tiles?

Mock-bond for a small format appearance
Excellent covering capacity
Can achieve an A+ rating in the BRE Green Guide to Specification
Certified 'Excellent' for BES 6001

Product Specifications:

Size of Tile: 420mm x 330mm

Colour: Old English dark red

Material: Concrete

Minimum Pitch:

22.5° Smooth (75mm headlap)
17.5° Smooth (100mm headlap)
30° Granular (75mm headlap)
25° Granular (100mm headlap)

Maximum Pitch: 90°

Minimum Headlap: 75mm

Maximum Gauge: 345mm

Cover Width: 292mm (nominal)

Covering Capacity:

9.9 tiles /m² at 75mm headlap
10.7 tiles /m² at 100mm headlap

Weight of Tiling:

50kg/m² (0.49 Kn/m²) at 75mm headlap
54kg/m² (0.53 Kn/m²) at 100mm headlap

Battens Required:

2.9 lin.m/m² at 75mm headlap
3.1 lin.m/m² at 100mm headlap

Batten Size Recommended:

38x 25mm for rafters/supports not exceeding 450mm centres
50 x 25mm for rafters/supports not exceeding 600mm centres

Tile Nails: 50mm x 3.35mm

Hanging length: 397mm (nominal)

Please note:The effectiveness of the tile or slate to operate at the minimum recommended pitch and lap may be influenced by special circumstances. Guidance on pitch and lap should be obtained from the Technical Advisory Service for the following:

Interlocking tiles and slates where the roof slope exceeds 6 metres in length and/or the site is rated to be in a severe exposure category. Double-lap fibre cement slates where the roof slope exceeds 6 metres in length (severe/very severe exposure) and 9 metres in length (sheltered/moderate exposure).